RE: Reading from the memory card.

["Creager, Robert S" <CreagRS@LOUISVILLE.STORTEK.COM>]

I was talking about the serial port for the STAMP controller problem.  I
just combined two responses into the single e-mail...

Thanks for the code pointer.
Rob

> 
> > From: Creager, Robert S [mailto:CreagRS@LOUISVILLE.STORTEK.COM]
> 
> > since I already have some windows serial port code working 
> > (communicating
> > with a 600 baud X10 controller). 
> 
> You don't need to use the serial port for this.  All you
> need to do is pull data off the RAM card and dump it on
> a disk.  The STAMP is out of the loop.
> 
> I am leaving now.  Out of town 'till Saturday morning.
> You might be able to find what you need on my web site
> http://rabbit.albertson-home.net/~chris/TASS_Software/index.html
> but this weekend I can point out exactly what I think you
> could use.  (Hint:  excerts from #3, #4 and some of #5)
> The device driver should be easy to read, in the real time
> controller the file is "buffer.c"
> 
>  > 
>